Skip to main content

An Inband Data Communication Network For the MPLS Transport Profile
draft-beller-mpls-tp-gach-dcn-01

Document Type Replaced Internet-Draft (individual)
Expired & archived
Authors Dieter Beller , Adrian Farrel
Last updated 2009-04-13 (Latest revision 2009-03-07)
Replaced by draft-ietf-mpls-tp-gach-dcn
RFC stream (None)
Intended RFC status (None)
Formats
Stream Stream state (No stream defined)
Consensus boilerplate Unknown
RFC Editor Note (None)
IESG IESG state Replaced by draft-ietf-mpls-tp-gach-dcn
Telechat date (None)
Responsible AD (None)
Send notices to (None)

This Internet-Draft is no longer active. A copy of the expired Internet-Draft is available in these formats:

Abstract

A Generic Associated Channel (G-ACH) has been defined as an extension of the pseudowire Associated Channel Header (ACH) to enable the realization of a control/communication channel associated with Multiprotocol Label Switching (MPLS) Label Switched Paths (LSPs), MPLS pseudowires (PWs), MPLS LSP segments, and MPLS sections between adjacent MPLS-capable devices. The MPLS Transport Profile (MPLS-TP) is a profile of the MPLS architecture that identifies elements of the MPLS toolkit that may be combined to build a carrier grade packet transport network based on MPLS packet switching technology. This document describes how the G-ACH may be used to provide the infrastructure that forms part of the Management Communication Network (MCN) and a Signaling Communication Network (SCN). Collectively, the MCN and SCN may be referred to as the Data Communication Network (DCN). The document explains how MCN and SCN packets are encapsulated, carried on the G-ACH, and demultiplexed for

Authors

Dieter Beller
Adrian Farrel

(Note: The e-mail addresses provided for the authors of this Internet-Draft may no longer be valid.)