datatracker.ietf.org
Sign In
Version 4.50, 2013-05-15
Report a bug

Benchmarking Methodology for Link-State IGP Data-Plane Route Convergence
draft-ietf-bmwg-igp-dataplane-conv-meth-23

RFC
Document Stream: IETF
Last updated: 2011-02-16
Intended RFC status: Informational
Other versions: (expired, archived): plain text, pdf, html

IETF State: WG Document (bmwg)
Document shepherd:(None)
Shepherd writeup
Consensus:Unknown

IESG State: RFC 6413
IANA Action State: No IC 
Responsible AD: Ron Bonica
IESG Note: Al Morton (acmorton@att.com) is the shepherd.
Send notices to: bmwg-chairs@tools.ietf.org

This Internet-Draft is no longer active. Unofficial copies of old Internet-Drafts can be found here:
http://tools.ietf.org/id/draft-ietf-bmwg-igp-dataplane-conv-meth.

Abstract:
This document describes the methodology for benchmarking Link-State Interior Gateway Protocol (IGP) Route Convergence. The methodology is to be used for benchmarking IGP convergence time through externally observable (black-box) data-plane measurements. The methodology can be applied to any link-state IGP, such as IS-IS and OSPF. This document is not an Internet Standards Track specification; it is published for informational purposes.

Authors:
Brent Imhoff <bimhoff@planetspork.com>
Scott Poretsky <sporetsky@allot.com>
Kris Michielsen <kmichiel@cisco.com>

(Note: The e-mail addresses provided for the authors of this Internet-Draft may no longer be valid)