Layer Two Tunnelling Protocol (L2TP) Over ATM Adaptation Layer 5 (AAL5)
draft-ietf-l2tpext-l2tp-atm-03

This Internet-Draft is no longer active. Unofficial copies of old Internet-Drafts can be found here:
http://tools.ietf.org/id/draft-ietf-l2tpext-l2tp-atm.

Abstract:
The Layer Two Tunneling Protocol (L2TP) [RFC2661] provides a standard method for transporting the link layer of PPP [RFC1661] between a dial-up server and a Network Access Server, using a network connection in lieu of a physical point to point connection. This document describes the use of an ATM network for the underlying network connection. ATM User-Network Interface (UNI) Signalling Specification Version 4.0 [SIG40] or Version 3.1 [SIG31] with ATM Adaptation Layer 5 (AAL5) [ITU93] are supported as interfaces to the ATM network.

Authors:
Suhail Nanji <SUHAIL@REDBACK.COM>
Ajoy Singh <asingh1@motorola.com>
Rollins Turner <rturner@eng.paradyne.com>

(Note: The e-mail addresses provided for the authors of this Internet-Draft may no longer be valid)