Attachment Individual Identifier (AII) Types for Aggregation
draft-ietf-pwe3-aii-aggregate-02

This Internet-Draft is no longer active. Unofficial copies of old Internet-Drafts can be found here:
http://tools.ietf.org/id/draft-ietf-pwe3-aii-aggregate.

Abstract:
The signaling protocols used to establish point-to-point pseudowires include type-length-value (TLV) fields that identify pseudowire endpoints called attachment individual identifiers (AIIs). This document defines AII structures in the form of new AII TLV fields that support AII aggregation for improved scalability and Virtual Private Network (VPN) auto-discovery. It is envisioned that this would be useful in large inter-domain virtual private wire service networks where pseudowires are established between selected local and remote provider edge (PE) nodes based on customer need. [STANDARDS-TRACK]

Authors:
Florin Balus <balus@nortel.com>
Luca Martini <lmartini@cisco.com>
Chris Metz <chmetz@cisco.com>
Jeff Sugimoto <sugimoto@nortel.com>

(Note: The e-mail addresses provided for the authors of this Internet-Draft may no longer be valid)