Routing Metrics Used for Path Calculation in Low-Power and Lossy Networks
draft-ietf-roll-routing-metrics-19

This Internet-Draft is no longer active. Unofficial copies of old Internet-Drafts can be found here:
http://tools.ietf.org/id/draft-ietf-roll-routing-metrics.

Abstract:
Low-Power and Lossy Networks (LLNs) have unique characteristics compared with traditional wired and ad hoc networks that require the specification of new routing metrics and constraints. By contrast, with typical Interior Gateway Protocol (IGP) routing metrics using hop counts or link metrics, this document specifies a set of link and node routing metrics and constraints suitable to LLNs to be used by the Routing Protocol for Low-Power and Lossy Networks (RPL). [STANDARDS-TRACK]

Authors:
Dominique Barthel <Dominique.Barthel@orange-ftgroup.com>
JP Vasseur <jpv@cisco.com>
Kris Pister <kpister@dustnetworks.com>
Mijeom Kim <mjkim@kt.com>
Nicolas Dejean <nicolas.dejean@coronis.com>

(Note: The e-mail addresses provided for the authors of this Internet-Draft may no longer be valid)