LDP Typed Wildcard FEC for the PW FEC Elements
draft-raza-pwe3-pw-typed-wc-fec-01
Document | Type |
Replaced Internet-Draft
(individual)
Expired & archived
|
|
---|---|---|---|
Authors | Carlos Pignataro , Syed Kamran Raza , Sami Boutros | ||
Last updated | 2012-04-18 (Latest revision 2011-06-02) | ||
Replaced by | draft-ietf-pwe3-pw-typed-wc-fec | ||
RFC stream | Internet Engineering Task Force (IETF) | ||
Intended RFC status | (None) | ||
Formats | |||
Stream | WG state | Adopted by a WG | |
Document shepherd | (None) | ||
IESG | IESG state | Replaced by draft-ietf-pwe3-pw-typed-wc-fec | |
Consensus boilerplate | Unknown | ||
Telechat date | (None) | ||
Responsible AD | (None) | ||
Send notices to | (None) |
This Internet-Draft is no longer active. A copy of the expired Internet-Draft is available in these formats:
Abstract
The "Typed Wildcard Forwarding Equivalence Class (FEC) Element" defines an extension to the Label Distribution Protocol (LDP) that can be used when it is desired to request or withdraw or release all label bindings for a given FEC Element type. However, a typed wildcard FEC element must be individually defined for each FEC element type. This specification defines the typed wildcard FEC elements for the PWid (0x80), Generalized PWid (0x81), and P2MP PW (0x82) FEC element types.
Authors
Carlos Pignataro
Syed Kamran Raza
Sami Boutros
(Note: The e-mail addresses provided for the authors of this Internet-Draft may no longer be valid.)