HPE HPE Cisco Systems Broadcom An IETF Network Slice service provides connectivity coupled with a set of network resource commitments and is expressed in terms of one or more connectivity constructs. A Network Resource Partition (NRP) is a collection of resources identified in the underlay network to support IETF Network Slice services. A Slice-Flow Aggregate refers to the set of traffic streams from one or more connectivity constructs belonging to one or more IETF Network Slices that are mapped to a specific NRP and provide the same forwarding treatment. The packets associated with a Slice-Flow Aggregate may carry markings in the packet's network layer header to identify this association and each is referred to as NRP Selector. The NRP Selector is used to map the packet to the associated NRP and provides the corresponding forwarding treatment to the packet. MPLS Network Actions (MNA) technologies are used to indicate actions for Label Switched Paths (LSPs) and/or MPLS packets and to transfer data needed for these actions. This document specifies options for using MPLS Network Actions (MNAs) to carry the NRP Selector in MPLS packets.