<?xml version="1.0" encoding="UTF-8"?>
<reference anchor="I-D.ietf-mpls-p2mp-bfd" target="https://datatracker.ietf.org/doc/html/draft-ietf-mpls-p2mp-bfd-04">
   <front>
      <title>BFD for Multipoint Networks over Point-to-Multi-Point MPLS LSP</title>
      <author initials="G." surname="Mirsky" fullname="Greg Mirsky">
         <organization>Ericsson</organization>
      </author>
      <author initials="G. S." surname="Mishra" fullname="Gyan Mishra">
         <organization>Verizon Inc.</organization>
      </author>
      <author initials="D. E." surname="Eastlake" fullname="Donald E. Eastlake 3rd">
         <organization>Futurewei Technologies</organization>
      </author>
      <date month="December" day="22" year="2022" />
      <abstract>
	 <t>   This document describes procedures for using Bidirectional Forwarding
   Detection (BFD) for multipoint networks to detect data plane failures
   in Multiprotocol Label Switching (MPLS) point-to-multipoint (p2mp)
   Label Switched Paths (LSPs) and Segment Routing (SR) point-to-
   multipoint policies with SR-MPLS data plane.

   Furthermore, this document also proposes an update to RFC 8562 and
   recommends the use of an IPv6 loopback address (:::1/128) and
   discourages the use of an IPv4 loopback address mapped to IPv6.

   It also describes the applicability of LSP Ping, as in-band, and the
   control plane, as out-band, solutions to bootstrap a BFD session.

   It also describes the behavior of the active tail for head
   notification.

	 </t>
      </abstract>
   </front>
   <seriesInfo name="Internet-Draft" value="draft-ietf-mpls-p2mp-bfd-04" />
   
</reference>
