<?xml version="1.0" encoding="UTF-8"?>
<reference anchor="I-D.ietf-mpls-seamless-mcast" target="https://datatracker.ietf.org/doc/html/draft-ietf-mpls-seamless-mcast-17">
   <front>
      <title>Inter-Area Point-to-Multipoint (P2MP) Segmented Label Switched Paths (LSPs)</title>
      <author initials="Y." surname="Rekhter" fullname="Yakov Rekhter">
         <organization>Juniper Networks</organization>
      </author>
      <author initials="E. C." surname="Rosen" fullname="Eric C. Rosen">
         <organization>Juniper Networks</organization>
      </author>
      <author initials="R." surname="Aggarwal" fullname="Rahul Aggarwal">
         <organization>Arktan</organization>
      </author>
      <author initials="T." surname="Morin" fullname="Thomas Morin">
         <organization>Orange</organization>
      </author>
      <author initials="I." surname="Grosclaude" fullname="Irene Grosclaude">
         <organization>Orange</organization>
      </author>
      <author initials="N." surname="Leymann" fullname="Nicolai Leymann">
         <organization>Deutsche Telekom AG</organization>
      </author>
      <author initials="S." surname="Saad" fullname="Samir Saad">
         <organization>AT&amp;T</organization>
      </author>
      <date month="February" day="20" year="2015" />
      <abstract>
	 <t>This document describes procedures for building inter-area point-to-multipoint (P2MP) segmented service label switched paths (LSPs) by partitioning such LSPs into intra-area segments and using BGP as the inter-area routing and Label Distribution Protocol (LDP).  Within each IGP area, the intra-area segments are either carried over intra-area P2MP LSPs, using P2MP LSP hierarchy, or instantiated using ingress replication.  The intra-area P2MP LSPs may be signaled using P2MP RSVP-TE or P2MP multipoint LDP (mLDP).  If ingress replication is used within an IGP area, then (multipoint-to-point) LDP LSPs or (point-to-point) RSVP-TE LSPs may be used in the IGP area.  The applications/services that use such inter-area service LSPs may be BGP Multicast VPN, Virtual Private LAN Service (VPLS) multicast, or global table multicast over MPLS.
	 </t>
      </abstract>
   </front>
   <seriesInfo name="Internet-Draft" value="draft-ietf-mpls-seamless-mcast-17" />
   
</reference>
