<?xml version="1.0" encoding="UTF-8"?>
<reference anchor="I-D.ietf-rtgwg-segment-routing-ti-lfa" target="https://datatracker.ietf.org/doc/html/draft-ietf-rtgwg-segment-routing-ti-lfa-09">
   <front>
      <title>Topology Independent Fast Reroute using Segment Routing</title>
      <author initials="S." surname="Litkowski" fullname="Stephane Litkowski">
         <organization>Cisco Systems</organization>
      </author>
      <author initials="A." surname="Bashandy" fullname="Ahmed Bashandy">
         <organization>Individual</organization>
      </author>
      <author initials="C." surname="Filsfils" fullname="Clarence Filsfils">
         <organization>Cisco Systems</organization>
      </author>
      <author initials="P." surname="Francois" fullname="Pierre Francois">
         <organization>INSA Lyon</organization>
      </author>
      <author initials="B." surname="Decraene" fullname="Bruno Decraene">
         <organization>Orange</organization>
      </author>
      <author initials="D." surname="Voyer" fullname="Daniel Voyer">
         <organization>Bell Canada</organization>
      </author>
      <date month="December" day="23" year="2022" />
      <abstract>
	 <t>   This document presents Topology Independent Loop-free Alternate Fast
   Re-route (TI-LFA), aimed at providing protection of node and
   adjacency segments within the Segment Routing (SR) framework.  This
   Fast Re-route (FRR) behavior builds on proven IP-FRR concepts being
   LFAs, remote LFAs (RLFA), and remote LFAs with directed forwarding
   (DLFA).  It extends these concepts to provide guaranteed coverage in
   any two connected network using a link-state IGP.  A key aspect of
   TI-LFA is the FRR path selection approach establishing protection
   over the expected post-convergence paths from the point of local
   repair, reducing the operational need to control the tie-breaks among
   various FRR options.

	 </t>
      </abstract>
   </front>
   <seriesInfo name="Internet-Draft" value="draft-ietf-rtgwg-segment-routing-ti-lfa-09" />
   
</reference>
