<?xml version="1.0" encoding="UTF-8"?>
<reference anchor="I-D.ietf-spring-stamp-srpm-mpls" target="https://datatracker.ietf.org/doc/html/draft-ietf-spring-stamp-srpm-mpls-04">
   <front>
      <title>Performance Measurement Using Simple Two-Way Active Measurement Protocol (STAMP) for Segment Routing over the MPLS Data Plane</title>
      <author initials="R." surname="Gandhi" fullname="Rakesh Gandhi">
         <organization>Cisco Systems, Inc.</organization>
      </author>
      <author initials="C." surname="Filsfils" fullname="Clarence Filsfils">
         <organization>Cisco Systems, Inc.</organization>
      </author>
      <author initials="B." surname="Janssens" fullname="Bart Janssens">
         <organization>Colt</organization>
      </author>
      <author initials="M." surname="Chen" fullname="Mach Chen">
         <organization>Individual</organization>
      </author>
      <author initials="R. F." surname="Foote" fullname="Richard &quot;Footer&quot; Foote">
         <organization>Nokia</organization>
      </author>
      <date month="July" day="22" year="2026" />
      <abstract>
	 <t>   Segment Routing (SR) can be used to steer packets through a network
   employing source routing.  SR can be applied to both MPLS (SR-MPLS)
   and IPv6 (SRv6) data planes.  This document describes the procedures
   for Performance Measurement in SR-MPLS networks using the Simple Two-
   Way Active Measurement Protocol (STAMP), as defined in RFC 8762,
   along with its optional extensions defined in RFC 8972 and further
   augmented in RFC 9503.  The described procedures are used for SR-MPLS
   paths (including Segment Lists of SR-MPLS Policies, SR-MPLS IGP best
   paths, and SR-MPLS IGP Flexible Algorithm paths), as well as Layer-3
   and Layer-2 services over the SR-MPLS paths.

	 </t>
      </abstract>
   </front>
   <seriesInfo name="Internet-Draft" value="draft-ietf-spring-stamp-srpm-mpls-04" />
   
</reference>
