<?xml version="1.0" encoding="UTF-8"?>
<reference anchor="I-D.ietf-spring-stamp-srpm-mpls" target="https://datatracker.ietf.org/doc/html/draft-ietf-spring-stamp-srpm-mpls-10">
   <front>
      <title>Performance Measurement Using Simple Two-Way Active Measurement Protocol (STAMP) for Segment Routing over the MPLS Data Plane</title>
      <author initials="R." surname="Gandhi" fullname="Rakesh Gandhi">
         <organization>Cisco Systems, Inc.</organization>
      </author>
      <author initials="C." surname="Filsfils" fullname="Clarence Filsfils">
         <organization>Cisco Systems, Inc.</organization>
      </author>
      <author initials="B." surname="Janssens" fullname="Bart Janssens">
         <organization>Colt</organization>
      </author>
      <author initials="M." surname="Chen" fullname="Mach Chen">
         <organization>Individual</organization>
      </author>
      <author initials="R. F." surname="Foote" fullname="Richard &quot;Footer&quot; Foote">
         <organization>Nokia</organization>
      </author>
      <date month="September" day="29" year="2026" />
      <abstract>
	 <t>   Segment Routing (SR) can be used to steer packets through a network
   employing source routing.  SR can be applied to both MPLS (SR-MPLS)
   and IPv6 (SRv6) data planes.  This document describes the procedures
   for performance measurement in SR-MPLS networks using the Simple Two-
   Way Active Measurement Protocol (STAMP), as specified in RFC 8762,
   along with its optional extensions specified in RFC 8972 and the SR-
   specific extensions specified in RFC 9503.  These procedures measure
   SR-MPLS paths (including Segment Lists of SR-MPLS Policies, SR-MPLS
   IGP best paths, and SR-MPLS IGP Flexible Algorithm (Flex-Algo)
   paths), as well as Layer-3 and Layer-2 services carried over those
   paths.

	 </t>
      </abstract>
   </front>
   <seriesInfo name="Internet-Draft" value="draft-ietf-spring-stamp-srpm-mpls-10" />
   
</reference>
