<?xml version="1.0" encoding="UTF-8"?>
<reference anchor="I-D.shawam-pwe3-ms-pw-protection" target="https://datatracker.ietf.org/doc/html/draft-shawam-pwe3-ms-pw-protection-02">
   <front>
      <title>S-PE Outage Protection for Static Multi-Segment Pseudowires</title>
      <author initials="A. G." surname="Malis" fullname="Andrew G. Malis">
         <organization>Huawei Technologies Co., Ltd</organization>
      </author>
      <author initials="L." surname="Andersson" fullname="Loa Andersson">
         <organization>Huawei Technologies Co., Ltd</organization>
      </author>
      <author initials="H." surname="van Helvoort" fullname="Huub van Helvoort">
         <organization>Hai Gaoming BV</organization>
      </author>
      <author initials="J." surname="Shin" fullname="Jongyoon Shin">
         <organization>SK Telecom</organization>
      </author>
      <author initials="L." surname="Wang" fullname="Lei Wang">
         <organization>China Mobile</organization>
      </author>
      <author initials="A." surname="D&#x27;Alessandro" fullname="Alessandro D&#x27;Alessandro">
         <organization>Telecom Italia</organization>
      </author>
      <date month="October" day="10" year="2014" />
      <abstract>
	 <t>   In MPLS and MPLS-TP environments, statically provisioned Single-
   Segment Pseudowires (SS-PWs) are protected against tunnel failure via
   MPLS-level and MPLS-TP-level tunnel protection.  With statically
   provisioned Multi-Segment Pseudowires (MS-PWs), each segment of the
   MS-PW is likewise protected from tunnel failures via MPLS-level and
   MPLS-TP-level tunnel protection.  However, static MS-PWs are not
   protected end-to-end against failure of one of the switching PEs
   (S-PEs) along the path of the MS-PW.  This document describes how to
   achieve this protection by updating the existing procedures in RFC
   6870.  It also contains an optional approach based on MPLS-TP Linear
   Protection.

	 </t>
      </abstract>
   </front>
   <seriesInfo name="Internet-Draft" value="draft-shawam-pwe3-ms-pw-protection-02" />
   
</reference>
