Skip to main content

Network Configuration
charter-ietf-netconf-20-00

WG review announcement

WG Review Announcement

From: The IESG <iesg-secretary@ietf.org>
To: IETF-Announce <ietf-announce@ietf.org>
Cc: netconf@ietf.org 
Reply-To: iesg@ietf.org
Subject: WG Review: Network Configuration (netconf)

The Network Configuration (netconf) WG in the Operations and Management Area
of the IETF is undergoing rechartering. The IESG has not made any
determination yet. The following draft charter was submitted, and is provided
for informational purposes only. Please send your comments to the IESG
mailing list (iesg@ietf.org) by 2026-06-02.

Network Configuration (netconf)
-----------------------------------------------------------------------
Current status: Active WG

Chairs:
  Kent Watsen <kent+ietf@watsen.net>
  Per Andersson <per.ietf@ionio.se>

Assigned Area Director:
  Mahesh Jethanandani <mjethanandani@gmail.com>

Operations and Management Area Directors:
  Mahesh Jethanandani <mjethanandani@gmail.com>
  Mohamed Boucadair <mohamed.boucadair@orange.com>

Mailing list:
  Address: netconf@ietf.org
  To subscribe: https://www.ietf.org/mailman/listinfo/netconf
  Archive: https://mailarchive.ietf.org/arch/browse/netconf/

Group page: https://datatracker.ietf.org/group/netconf/

Charter: https://datatracker.ietf.org/doc/charter-ietf-netconf/

The NETCONF Working Group, previously named after the NETCONF protocol, now
renamed as the NETwork CONFiguration Working Group, is responsible for the
development and maintenance of protocols such as NETCONF and RESTCONF for
YANG data model-driven management (for the purposes of, for example,
configuration, monitoring, telemetry, and zero-touch), their transports and
encodings, defining data models necessary to support the protocols, and
defining mechanisms supporting the operational deployment of systems using
the protocols.

The NETCONF protocol is data modeling language independent, but YANG (RFC
7950) is the recommended NETCONF data modeling language, which introduces
advanced language features for configuration management.

The NETCONF working group should maintain parity between the NETCONF and
RESTCONF protocols.

The NETCONF WG is currently responsible for:

   a) The network management protocol NETCONF (RFC 6241). This effort entails
   periodically updating the NETCONF related specifications to address new
   requirements as they arise.

   b) The network management protocol RESTCONF (RFC 8040). This effort
   entails periodically updating the RESTCONF related specifications to
   address new requirements as they arise.

   c) The transports and encodings used by the data model-driven protocols.

   d) The data models and mechanisms related to network management protocols.
   Specifically, data models enabling the configuration and/or monitoring of
   the protocols themselves.

   e) The data models for subscriptions to data, and protocol bindings for
   pushing subscribed data to clients, for the purpose of monitoring and
   telemetry.

   f) The mechanisms enabling devices zero-touch provisioning and the related
   call home functions.

   The NETCONF working group consults with the NETMOD working group to
   ensure that new requirements are understood and can be met by the
   YANG data modeling language (RFC 7950) developed within that working
   group.

Milestones:


WG action announcement

WG Action Announcement

From: The IESG <iesg-secretary@ietf.org>
To: IETF-Announce <ietf-announce@ietf.org>
Cc: The IESG <iesg@ietf.org>,
    netconf-chairs@ietf.org,
    netconf@ietf.org 
Subject: WG Action: Rechartered Network Configuration (netconf)

The Network Configuration (netconf) WG in the Operations and Management Area
of the IETF has been rechartered. For additional information, please contact
the Area Directors or the WG Chairs.

Network Configuration (netconf)
-----------------------------------------------------------------------
Current status: Active WG

Chairs:
  Kent Watsen <kent+ietf@watsen.net>
  Per Andersson <per.ietf@ionio.se>

Assigned Area Director:
  Mahesh Jethanandani <mjethanandani@gmail.com>

Operations and Management Area Directors:
  Mahesh Jethanandani <mjethanandani@gmail.com>
  Mohamed Boucadair <mohamed.boucadair@orange.com>

Mailing list:
  Address: netconf@ietf.org
  To subscribe: https://www.ietf.org/mailman/listinfo/netconf
  Archive: https://mailarchive.ietf.org/arch/browse/netconf/

Group page: https://datatracker.ietf.org/group/netconf/

Charter: https://datatracker.ietf.org/doc/charter-ietf-netconf/

The NETCONF Working Group, previously named after the NETCONF protocol, now
renamed as the NETwork CONFiguration Working Group, is responsible for the
development and maintenance of protocols such as NETCONF and RESTCONF for
YANG data model-driven management (for the purposes of, for example,
configuration, monitoring, telemetry, and zero-touch), their transports and
encodings, defining data models necessary to support the protocols, and
defining mechanisms supporting the operational deployment of systems using
the protocols.

The NETCONF protocol is data modeling language independent, but YANG (RFC
7950) is the recommended NETCONF data modeling language, which introduces
advanced language features for configuration management.

The NETCONF working group should maintain parity between the NETCONF and
RESTCONF protocols.

The NETCONF WG is currently responsible for:

   a) The network management protocol NETCONF (RFC 6241). This effort entails
   periodically updating the NETCONF related specifications to address new
   requirements as they arise.

   b) The network management protocol RESTCONF (RFC 8040). This effort
   entails periodically updating the RESTCONF related specifications to
   address new requirements as they arise.

   c) The transports and encodings used by the data model-driven protocols.

   d) The data models and mechanisms related to network management protocols.
   Specifically, data models enabling the configuration and/or monitoring of
   the protocols themselves.

   e) The data models for subscriptions to data, and protocol bindings for
   pushing subscribed data to clients, for the purpose of monitoring and
   telemetry.

   f) The mechanisms enabling devices zero-touch provisioning and the related
   call home functions.

   The NETCONF working group consults with the NETMOD working group to
   ensure that new requirements are understood and can be met by the
   YANG data modeling language (RFC 7950) developed within that working
   group.

Milestones:


Ballot announcement

Ballot Announcement

Technical Summary

   Relevant content can frequently be found in the abstract
   and/or introduction of the document.  If not, this may be 
   an indication that there are deficiencies in the abstract
   or introduction.

Working Group Summary

   Was there anything in the WG process that is worth noting?
   For example, was there controversy about particular points 
   or were there decisions where the consensus was
   particularly rough? 

Document Quality

   Are there existing implementations of the protocol?  Have a 
   significant number of vendors indicated their plan to
   implement the specification?  Are there any reviewers that
   merit special mention as having done a thorough review,
   e.g., one that resulted in important changes or a
   conclusion that the document had no substantive issues?  If
   there was a MIB Doctor, Media Type, or other Expert Review,
   what was its course (briefly)?  In the case of a Media Type
   Review, on what date was the request posted?

Personnel

   Who is the Document Shepherd for this document?  Who is the 
   Responsible Area Director?  If the document requires IANA
   experts(s), insert 'The IANA Expert(s) for the registries
   in this document are <TO BE ADDED BY THE AD>.'

RFC Editor Note

  (Insert RFC Editor Note here or remove section)

IRTF Note

  (Insert IRTF Note here or remove section)

IESG Note

  (Insert IESG Note here or remove section)

IANA Note

  (Insert IANA Note here or remove section)