Reverse Defect Indicator for MPLS FM OAM
draft-ama-mpls-fm-rdi-00
Document | Type |
Expired Internet-Draft
(individual)
Expired & archived
|
|
---|---|---|---|
Authors | Ashesh Mishra , Mahesh Jethanandani , Ankur Saxena | ||
Last updated | 2018-05-29 (Latest revision 2017-11-25) | ||
RFC stream | (None) | ||
Intended RFC status | (None) | ||
Formats | |||
Stream | Stream state | (No stream defined) | |
Consensus boilerplate | Unknown | ||
RFC Editor Note | (None) | ||
IESG | IESG state | Expired | |
Telechat date | (None) | ||
Responsible AD | (None) | ||
Send notices to | (None) |
This Internet-Draft is no longer active. A copy of the expired Internet-Draft is available in these formats:
Abstract
This document describes extensions to the MPLS Fault Management Operations, Administration, and Management (MPLS FM OAM) in RFC 6427 [RFC6427] to support Remote Defect Indication (RDI) functionality. Specifically, it describes a mechanism for propagating MPLS FM OAM messages to the upstream Label Edge Router (LER) in MPLS-TP [RFC5921] bi-directional (associated and co-routed) Label Switched Paths (LSPs).
Authors
Ashesh Mishra
Mahesh Jethanandani
Ankur Saxena
(Note: The e-mail addresses provided for the authors of this Internet-Draft may no longer be valid.)