LPWAN Static Context Header Compression (SCHC) for ICMPv6
draft-barthel-icmpv6-schc-00
Document | Type |
Replaced Internet-Draft
(individual)
Expired & archived
|
|
---|---|---|---|
Authors | Dominique Barthel , Laurent Toutain , Arunprabhu Kandasamy | ||
Last updated | 2018-05-01 (Latest revision 2017-10-28) | ||
Replaced by | draft-barthel-oam-schc | ||
RFC stream | (None) | ||
Intended RFC status | (None) | ||
Formats | |||
Stream | Stream state | (No stream defined) | |
Consensus boilerplate | Unknown | ||
RFC Editor Note | (None) | ||
IESG | IESG state | Replaced by draft-barthel-oam-schc | |
Telechat date | (None) | ||
Responsible AD | (None) | ||
Send notices to | (None) |
This Internet-Draft is no longer active. A copy of the expired Internet-Draft is available in these formats:
Abstract
ICMPv6 is a companion protocol to IPv6. It defines messages that inform the source of IPv6 packets of errors during packet delivery. It also defines the Echo Request/Reply messages that are used for basic network troubleshooting (ping command). ICMPv6 messages are transported on IPv6. This document describes how to adapt ICMPv6 to Low Power Wide Area Networks (LPWANs) by compressing ICMPv6/IPv6 headers and by protecting the LPWAN network and the Device from undesirable ICMPv6 traffic.
Authors
Dominique Barthel
Laurent Toutain
Arunprabhu Kandasamy
(Note: The e-mail addresses provided for the authors of this Internet-Draft may no longer be valid.)