Enabling GMPLS control of G.709 Optical Transport Networks - Architectural Framework -
draft-bellato-ccamp-g709-framework-01
| Document | Type |
Expired Internet-Draft
(individual)
Expired & archived
|
|
|---|---|---|---|
| Author | Alberto Bellato | ||
| Last updated | 2001-11-28 | ||
| RFC stream | (None) | ||
| Intended RFC status | (None) | ||
| Formats | |||
| Stream | Stream state | (No stream defined) | |
| Consensus boilerplate | Unknown | ||
| RFC Editor Note | (None) | ||
| IESG | IESG state | Expired | |
| Telechat date | (None) | ||
| Responsible AD | (None) | ||
| Send notices to | (None) |
This Internet-Draft is no longer active. A copy of the expired Internet-Draft is available in these formats:
Abstract
Along with the current development of packet over lambda switching (referred to as MPLambdaS), there are considerable developments in optical transport systems based on the ITU-T G.872 [ITUT-G872] and G.709 [ITUT-G709] specification. The Optical Transport Network (OTN) defined in G.872 and G.709 enables ultra-long-haul transmission of various client signal types through the use of Forward Error Correction (FEC) bytes. G.709 specifies the data plane transport structure and allocates overhead bytes for the OTN control plane.
Authors
(Note: The e-mail addresses provided for the authors of this Internet-Draft may no longer be valid.)