Unified IPv4-in-IPv6 Softwire CPE
draft-bfmk-softwire-unified-cpe-02
| Document | Type |
Replaced Internet-Draft
(softwire WG)
Expired & archived
|
|
|---|---|---|---|
| Authors | Mohamed Boucadair , Ian Farrer | ||
| Last updated | 2013-03-13 (Latest revision 2013-01-17) | ||
| Replaced by | draft-ietf-softwire-unified-cpe | ||
| RFC stream | Internet Engineering Task Force (IETF) | ||
| Intended RFC status | (None) | ||
| Formats | |||
| Additional resources | Mailing list discussion | ||
| Stream | WG state | Adopted by a WG | |
| Document shepherd | (None) | ||
| IESG | IESG state | Replaced by draft-ietf-softwire-unified-cpe | |
| Consensus boilerplate | Unknown | ||
| Telechat date | (None) | ||
| Responsible AD | (None) | ||
| Send notices to | (None) |
This Internet-Draft is no longer active. A copy of the expired Internet-Draft is available in these formats:
Abstract
Transporting IPv4 packets encapsulated in IPv6 is a common solution to the problem of IPv4 service continuity over IPv6-only provider networks. A number of differing functional approaches have been developed for this, each having their own specific characteristics. As these approaches share a similar functional architecture and use the same data plane mechanisms, this memo describes a specification whereby a single CPE can interwork with all of the standardized and proposed approaches to providing encapsulated IPv4 in IPv6 services.
Authors
(Note: The e-mail addresses provided for the authors of this Internet-Draft may no longer be valid.)