Per VPN Routing for Layer 3 PPVPNs
draft-bhat-l3vpn-per-vpn-routing-00
| Document | Type |
Expired Internet-Draft
(individual)
Expired & archived
|
|
|---|---|---|---|
| Author | Girish Bhat | ||
| Last updated | 2004-08-03 | ||
| RFC stream | (None) | ||
| Intended RFC status | (None) | ||
| Formats | |||
| Stream | Stream state | (No stream defined) | |
| Consensus boilerplate | Unknown | ||
| RFC Editor Note | (None) | ||
| IESG | IESG state | Expired | |
| Telechat date | (None) | ||
| Responsible AD | (None) | ||
| Send notices to | (None) |
This Internet-Draft is no longer active. A copy of the expired Internet-Draft is available in these formats:
Abstract
This document describes a method to do Per VPN routing for L3 PPVPNs. The solution uses BGP for auto-discovery of VPN membership, but uses Per VPN RIP instances and dynamic MPLS tunnel interfaces to exchange customer routes. The document proposes modifications to the RIP protocol to the make the solution scalable. The framework presented also supports deployment of multicast routing and forwarding for L3 PPVPNs without enabling multicast in the core.
Authors
(Note: The e-mail addresses provided for the authors of this Internet-Draft may no longer be valid.)