Skip to main content

SR-MPLS / SRv6 Transport Interworking
draft-bonica-spring-srv6-end-dtm-07

The information below is for an old version of the document.
Document Type
This is an older version of an Internet-Draft whose latest revision state is "Active".
Expired & archived
Authors Shraddha Hegde , Parag Kaneriya , Ron Bonica , Shaofu Peng , Greg Mirsky , Zheng Zhang , Bruno Decraene
Last updated 2022-07-09 (Latest revision 2022-01-05)
RFC stream (None)
Formats
Stream Stream state (No stream defined)
Consensus boilerplate Unknown
RFC Editor Note (None)
IESG IESG state Expired
Telechat date (None)
Responsible AD (None)
Send notices to (None)

This Internet-Draft is no longer active. A copy of the expired Internet-Draft is available in these formats:

Abstract

This document describes procedures for interworking between an SR- MPLS transit domain and an SRv6 transit domain. Each domain contains Provider Edge (PE) and Provider (P) routers. Area Border Routers (ABR) provide connectivity between domains. The procedures described in this document require the ABR to carry a route to each PE router. However, they do not required the ABR to carry service (i.e., customer) routes. In that respect, these procedures resemble L3VPN Interprovider Option C. Procedures described in this document support interworking for global IPv4 and IPv6 service prefixes. They do not support interworking for VPN services prefixes where the SR-MPLS domain uses MPLS service labels.

Authors

Shraddha Hegde
Parag Kaneriya
Ron Bonica
Shaofu Peng
Greg Mirsky
Zheng Zhang
Bruno Decraene

(Note: The e-mail addresses provided for the authors of this Internet-Draft may no longer be valid.)