A Network YANG Data Model for Attachment Circuits
draft-boro-opsawg-ntw-attachment-circuit-03
| Document | Type |
Replaced Internet-Draft
(individual)
Expired & archived
|
|
|---|---|---|---|
| Authors | Mohamed Boucadair , Richard Roberts , Oscar Gonzalez de Dios , Samier Barguil , Bo Wu | ||
| Last updated | 2023-09-05 | ||
| Replaced by | draft-ietf-opsawg-ntw-attachment-circuit | ||
| RFC stream | (None) | ||
| Intended RFC status | (None) | ||
| Formats | |||
| Yang Validation | 0 errors, 14 warnings | ||
| Additional resources |
GitHub Repository
|
||
| Stream | Stream state | (No stream defined) | |
| Consensus boilerplate | Unknown | ||
| RFC Editor Note | (None) | ||
| IESG | IESG state | Replaced by draft-ietf-opsawg-ntw-attachment-circuit | |
| Telechat date | (None) | ||
| Responsible AD | (None) | ||
| Send notices to | (None) |
This Internet-Draft is no longer active. A copy of the expired Internet-Draft is available in these formats:
Abstract
This document specifies a network model for attachment circuits. The model can be used for the provisioning of attachment circuits prior or during service provisioning (e.g., Network Slice Service). A companion service model is specified in [I-D.boro-opsawg-teas-attachment-circuit]. The module augments the Service Attachment Point (SAP) model with the detailed information for the provisioning of attachment circuits in Provider Edges (PEs).
Authors
Mohamed Boucadair
Richard Roberts
Oscar Gonzalez de Dios
Samier Barguil
Bo Wu
(Note: The e-mail addresses provided for the authors of this Internet-Draft may no longer be valid.)