Skip to main content

Universal Plug and Play (UPnP) Internet Gateway Device (IGD)-Port Control Protocol (PCP) Interworking Function
draft-bpw-pcp-upnp-igd-interworking-02

Document Type Replaced Internet-Draft (individual)
Expired & archived
Authors Mohamed Boucadair , Reinaldo Penno , Dan Wing , Francis Dupont
Last updated 2011-02-07
Replaces draft-bpw-softwire-upnp-pcp-interworking
Replaced by draft-ietf-pcp-upnp-igd-interworking
RFC stream (None)
Intended RFC status (None)
Formats
Stream Stream state (No stream defined)
Consensus boilerplate Unknown
RFC Editor Note (None)
IESG IESG state Replaced by draft-ietf-pcp-upnp-igd-interworking
Telechat date (None)
Responsible AD (None)
Send notices to (None)

This Internet-Draft is no longer active. A copy of the expired Internet-Draft is available in these formats:

Abstract

This document specifies the behavior of the UPnP IGD (Internet Gateway Device)/PCP Interworking Function. An UPnP IGD-PCP Interworking Function (IGD-PCP IWF) is required to be embedded in CP routers to allow for transparent NAT control in environments where UPnP is used in the LAN side and PCP in the external side of the CP router.

Authors

Mohamed Boucadair
Reinaldo Penno
Dan Wing
Francis Dupont

(Note: The e-mail addresses provided for the authors of this Internet-Draft may no longer be valid.)