EVPN-VPWS Seamless Integration with Legacy VPWS
draft-brissette-bess-evpn-vpws-seamless-01
| Document | Type |
This is an older version of an Internet-Draft whose latest revision state is "Replaced".
Expired & archived
|
|
|---|---|---|---|
| Authors | Patrice Brissette , Ali Sajassi , Luc André Burdet , Jim Uttaro , Daniel Voyer , Iman Ghamari , Eddie Leyton | ||
| Last updated | 2020-05-20 (Latest revision 2019-11-17) | ||
| Replaces | draft-brissette-bess-vpws-seamless | ||
| Replaced by | draft-ietf-bess-evpn-vpws-seamless | ||
| RFC stream | (None) | ||
| Formats | |||
| Stream | Stream state | (No stream defined) | |
| Consensus boilerplate | Unknown | ||
| RFC Editor Note | (None) | ||
| IESG | IESG state | Expired | |
| Telechat date | (None) | ||
| Responsible AD | (None) | ||
| Send notices to | (None) |
This Internet-Draft is no longer active. A copy of the expired Internet-Draft is available in these formats:
Abstract
This document specifies mechanisms for backward compatibility of Ethernet VPN Virtual Private Wire Service (EVPN-VPWS) solutions with legacy Virtual Private Wire Service (VPWS). It provides mechanisms for seamless integration in the same MPLS/IP network on a per- pseudowire or per flexible-crossconnect service basis. Implementation of this document enables service providers to introduce EVPN-VPWS PEs in their brown-field deployments of legacy VPWS networks. This document specifies control-plane and forwarding behaviour needed for auto-discovery of a pseudowire in order to enable seamless integration between EVPN-VPWS and VPWS PEs.
Authors
Patrice Brissette
Ali Sajassi
Luc André Burdet
Jim Uttaro
Daniel Voyer
Iman Ghamari
Eddie Leyton
(Note: The e-mail addresses provided for the authors of this Internet-Draft may no longer be valid.)