EVPN-VPWS Seamless Integration with L2VPN VPWS
draft-brissette-bess-evpn-vpws-seamless-07
| Document | Type |
Replaced Internet-Draft
(individual)
Expired & archived
|
|
|---|---|---|---|
| Authors | Patrice Brissette , Wen Lin , Jorge Rabadan , Jim Uttaro , Bin Wen | ||
| Last updated | 2023-05-17 | ||
| Replaces | draft-brissette-bess-vpws-seamless | ||
| Replaced by | draft-ietf-bess-evpn-vpws-seamless | ||
| RFC stream | (None) | ||
| Intended RFC status | (None) | ||
| Formats | |||
| Stream | Stream state | (No stream defined) | |
| Consensus boilerplate | Unknown | ||
| RFC Editor Note | (None) | ||
| IESG | IESG state | Replaced by draft-ietf-bess-evpn-vpws-seamless | |
| Telechat date | (None) | ||
| Responsible AD | (None) | ||
| Send notices to | (None) |
This Internet-Draft is no longer active. A copy of the expired Internet-Draft is available in these formats:
Abstract
This document presents a solution for migrating L2VPN Virtual Private Wire Service (VPWS) to Ethernet VPN Virtual Private Wire Service (EVPN-VPWS) services. The solution allows the coexistence of EVPN and L2VPN services under the same point-to-point VPN instance. By using this seamless integration solution, a service provider can introduce EVPN into their existing L2VPN network or migrate from an existing L2VPN based network to EVPN. The migration may be done per pseudowire or per flexible-crossconnect (FXC) service basis. This document specifies control-plane and forwarding behaviors.
Authors
Patrice Brissette
Wen Lin
Jorge Rabadan
Jim Uttaro
Bin Wen
(Note: The e-mail addresses provided for the authors of this Internet-Draft may no longer be valid.)