NSH Encapsulation for In-situ OAM Data
draft-brockners-sfc-ioam-nsh-01

Document Type Replaced Internet-Draft (candidate for sfc WG)
Last updated 2018-05-07 (latest revision 2018-03-05)
Replaced by draft-ietf-sfc-ioam-nsh
Stream IETF
Intended RFC status (None)
Formats
Expired & archived
plain text pdf html bibtex
Stream WG state Call For Adoption By WG Issued
Document shepherd No shepherd assigned
IESG IESG state Replaced by draft-ietf-sfc-ioam-nsh
Consensus Boilerplate Unknown
Telechat date
Responsible AD (None)
Send notices to (None)

This Internet-Draft is no longer active. A copy of the expired Internet-Draft can be found at
https://www.ietf.org/archive/id/draft-brockners-sfc-ioam-nsh-01.txt

Abstract

In-situ Operations, Administration, and Maintenance (OAM) records operational and telemetry information in the packet while the packet traverses a path between two points in the network. This document outlines how IOAM data fields are encapsulated in the Network Service Header (NSH).

Authors

Frank Brockners (fbrockne@cisco.com)
Shwetha Bhandari (shwethab@cisco.com)
Vengada Govindan (venggovi@cisco.com)
Carlos Pignataro (cpignata@cisco.com)
Hannes Gredler (hannes@rtbrick.com)
John Leddy (john_leddy@cable.comcast.com)
Stephen Youell (stephen.youell@jpmorgan.com)
Tal Mizrahi (talmi@marvell.com)
David Mozes (mosesster@gmail.com)
Petr Lapukhov (petr@fb.com)
Remy Chang (unknown-email-Remy-Chang)

(Note: The e-mail addresses provided for the authors of this Internet-Draft may no longer be valid.)