Skip to main content

MPLS Performance Measurement UDP Return Path
draft-bryant-mpls-oam-udp-return-02

Document Type Replaced Internet-Draft (mpls WG)
Authors Stewart Bryant , Stewart Bryant , Siva Sivabalan , Siva Sivabalan , Sagar Soni , Sagar Soni
Last updated 2014-07-03
Replaced by draft-ietf-mpls-pm-udp-return
Stream Internet Engineering Task Force (IETF)
Formats
Expired & archived
Stream WG state Adopted by a WG
Document shepherd Loa Andersson
IESG IESG state Replaced by draft-ietf-mpls-pm-udp-return
Consensus boilerplate Unknown
Telechat date (None)
Responsible AD (None)
Send notices to (None)

This Internet-Draft is no longer active. A copy of the expired Internet-Draft is available in these formats:

Abstract

This document specifies the proceedure to be used by the Packet Loss and Delay Measurement for MPLS Networks protocol defined in RFC6374 when sending and processing MPLS performance management out-of-band responses for delay and loss measurements over an IP/UDP return path.

Authors

Stewart Bryant
Stewart Bryant
Siva Sivabalan
Siva Sivabalan
Sagar Soni
Sagar Soni

(Note: The e-mail addresses provided for the authors of this Internet-Draft may no longer be valid.)