Packet Pseudowire Encapsulation over an MPLS PSN
draft-bryant-pwe3-packet-pw-04

Document Type Replaced Internet-Draft (individual)
Last updated 2012-10-11 (latest revision 2010-07-08)
Replaced by draft-ietf-pwe3-packet-pw
Stream (None)
Intended RFC status (None)
Formats
Expired & archived
plain text pdf html bibtex
Stream Stream state (No stream defined)
Consensus Boilerplate Unknown
RFC Editor Note (None)
IESG IESG state Replaced by draft-ietf-pwe3-packet-pw
Telechat date
Responsible AD (None)
Send notices to (None)

This Internet-Draft is no longer active. A copy of the expired Internet-Draft can be found at
https://www.ietf.org/archive/id/draft-bryant-pwe3-packet-pw-04.txt

Abstract

This document describes a pseudowire mechanism that is used to transport a packet service over an MPLS PSN is the case where the client LSR and the server PE are co-resident in the same equipment. This pseudowire mechanism may be used to carry all of the required layer 2 and layer 3 protocols between the pair of client LSRs.

Authors

Stewart Bryant (stbryant@cisco.com)
Luca Martini (lmartini@cisco.com)
George Swallow (swallow@cisco.com)
Andrew Malis (andrew.g.malis@verizon.com)

(Note: The e-mail addresses provided for the authors of this Internet-Draft may no longer be valid.)