Extensions to P2MP RSVP-TE for Hose Model Provisioning in L3 PPVPN
draft-byun-vpn-provision-rsvp-te-00
| Document | Type |
Expired Internet-Draft
(individual)
Expired & archived
|
|
|---|---|---|---|
| Authors | Haesun Byun , Dr. Meejeong Lee | ||
| Last updated | 2006-06-22 | ||
| RFC stream | (None) | ||
| Intended RFC status | (None) | ||
| Formats | |||
| Stream | Stream state | (No stream defined) | |
| Consensus boilerplate | Unknown | ||
| RFC Editor Note | (None) | ||
| IESG | IESG state | Expired | |
| Telechat date | (None) | ||
| Responsible AD | (None) | ||
| Send notices to | (None) |
This Internet-Draft is no longer active. A copy of the expired Internet-Draft is available in these formats:
Abstract
This document describes extensions to point to multipoint resource reservation protocol traffic engineering (P2MP RSVP-TE) for hose model based quality of service (QoS) provisioning in Layer 3 Provider Provisioned Virtual Private Network (L3 PPVPN). This protocol enables dynamic and automatic resource reservation according to hose-specific or VPN-specific state provisioning, which are the resource provisioning mechanisms for hose model. Protocol elements and procedures for this solution are described.
Authors
(Note: The e-mail addresses provided for the authors of this Internet-Draft may no longer be valid.)