Unmanned Aircraft System Remote Identification Requirements
draft-card-tmrid-uas-reqs-01
| Document | Type |
Replaced Internet-Draft
(individual)
Expired & archived
|
|
|---|---|---|---|
| Authors | Stuart W. Card , Adam Wiethuechter , Robert Moskowitz | ||
| Last updated | 2020-03-23 | ||
| Replaced by | draft-card-drip-reqs | ||
| RFC stream | (None) | ||
| Intended RFC status | (None) | ||
| Formats | |||
| Stream | Stream state | (No stream defined) | |
| Consensus boilerplate | Unknown | ||
| RFC Editor Note | (None) | ||
| IESG | IESG state | Replaced by draft-card-drip-reqs | |
| Telechat date | (None) | ||
| Responsible AD | (None) | ||
| Send notices to | (None) |
This Internet-Draft is no longer active. A copy of the expired Internet-Draft is available in these formats:
Abstract
This document defines the requirements for Trustworthy Multipurpose Remote Identification (IETF tm-rid) protocols and services to support Unmanned Aircraft System Remote Identification (UAS RID). Objectives include: complementing external technical standards as regulator-accepted means of compliance with UAS RID regulations; facilitating use of existing Internet resources to support UAS RID and to enable enhanced related services; and enabling verification that UAS RID information is trustworthy (to some extent, even in the absence of Internet connectivity at the receiving node).
Authors
Stuart W. Card
Adam Wiethuechter
Robert Moskowitz
(Note: The e-mail addresses provided for the authors of this Internet-Draft may no longer be valid.)