PSC protocol updates for non-revertive operation
draft-cdh-mpls-tp-psc-non-revertive-01

Document Type Replaced Internet-Draft (mpls WG)
Last updated 2013-10-21 (latest revision 2013-09-10)
Replaced by draft-ryoogray-mpls-tp-psc-itu
Stream IETF
Intended RFC status (None)
Formats
Expired & archived
plain text pdf html bibtex
Stream WG state Candidate for WG Adoption
Document shepherd Loa Andersson
IESG IESG state Replaced by draft-ryoogray-mpls-tp-psc-itu
Consensus Boilerplate Unknown
Telechat date
Responsible AD (None)
Send notices to (None)

This Internet-Draft is no longer active. A copy of the expired Internet-Draft can be found at
https://www.ietf.org/archive/id/draft-cdh-mpls-tp-psc-non-revertive-01.txt

Abstract

This document optionally updates [RFC6378], "MPLS Transport Profile (MPLS-TP) Linear Protection", to change non-revertive operation to be aligned with the behavior defined in [RFC4427] and in an effort to satisfy the ITU-T's protection switching requirements. An operator command, Manual Switch to Working (MS-W) is also included to revert traffic to the working path in non-revertive operation.

Authors

Tae-sik Cheung (cts@etri.re.kr)
Alessandro D'Alessandro (alessandro.dalessandro@telecomitalia.it)
Huub van Helvoort (huub.van.helvoort@huawei.com)

(Note: The e-mail addresses provided for the authors of this Internet-Draft may no longer be valid.)