Multipoint BFD for MPLS
draft-chandra-hegde-mpoint-bfd-for-mpls-00
Document | Type |
Expired Internet-Draft
(individual)
Expired & archived
|
|
---|---|---|---|
Authors | Vikas Hegde, Chandrasekar R | ||
Last updated | 2012-09-05 (Latest revision 2012-03-04) | ||
RFC stream | (None) | ||
Intended RFC status | (None) | ||
Formats | |||
Stream | Stream state | (No stream defined) | |
Consensus boilerplate | Unknown | ||
RFC Editor Note | (None) | ||
IESG | IESG state | Expired | |
Telechat date | (None) | ||
Responsible AD | (None) | ||
Send notices to | (None) |
This Internet-Draft is no longer active. A copy of the expired Internet-Draft is available in these formats:
Abstract
Recent proposals have extended the use of Bidirectional Forwarding Detection to detect data plane failures in multipoint networks. One desirable application of Multipoint BFD [MP-BFD] is to detect data path failures in point-to-multipoint Label Switched Paths (P2MP LSPs). The scope of this document is to discuss the applicability of multipoint BFD for fault detection in the data plane of P2MP LSPs. The document extends the techniques and mechanisms mentioned in [RFC5884] and applies them to MPLS P2MP environment.
Authors
(Note: The e-mail addresses provided for the authors of this Internet-Draft may no longer be valid.)