I2RS Information Model for MPLS LDP
draft-chen-i2rs-mpls-ldp-info-model-00
| Document | Type |
Expired Internet-Draft
(individual)
Expired & archived
|
|
|---|---|---|---|
| Authors | Xia Chen , Zhenbin Li , Susan Hares , Russ White , Jeff Tantsura | ||
| Last updated | 2015-04-30 (Latest revision 2014-10-27) | ||
| RFC stream | (None) | ||
| Intended RFC status | (None) | ||
| Formats | |||
| Stream | Stream state | (No stream defined) | |
| Consensus boilerplate | Unknown | ||
| RFC Editor Note | (None) | ||
| IESG | IESG state | Expired | |
| Telechat date | (None) | ||
| Responsible AD | (None) | ||
| Send notices to | (None) |
This Internet-Draft is no longer active. A copy of the expired Internet-Draft is available in these formats:
Abstract
The Label Distribution Protocol (LDP) ([RFC5036]) is a protocol defined for distributing labels in MPLS domain. Traditionally LDP protocol may be managed via CLI, SNMP or NETCONF. The Interface to the Routing System's (I2RS) Programmatic interface (draft-ietf-i2rs- architecture) provides an alternate way to control the configuration and diagnose the operation of the LDP protocol. This document specifies an information model for the LDP protocol to facilitate the definition of a standardized data model, which can be used to define interfaces to the LDP from an entity that may even be external to the routing system. Based on standardized data model and interfaces, use cases of I2RS interface to LDP protocol (draft-chen- i2rs-mpls-ldp-usecases) can be supported.
Authors
Xia Chen
Zhenbin Li
Susan Hares
Russ White
Jeff Tantsura
(Note: The e-mail addresses provided for the authors of this Internet-Draft may no longer be valid.)