SRv6 Segment Identifier Compression for Satelite Networks
draft-chen-spring-satellite-csid-00
| Document | Type |
Expired Internet-Draft
(individual)
Expired & archived
|
|
|---|---|---|---|
| Authors | 陈宏彦 , Jun Liu , Wenfeng Li , Kanglian Zhao | ||
| Last updated | 2026-08-01 (Latest revision 2026-01-28) | ||
| RFC stream | (None) | ||
| Intended RFC status | (None) | ||
| Formats | |||
| Stream | Stream state | (No stream defined) | |
| Consensus boilerplate | Unknown | ||
| RFC Editor Note | (None) | ||
| IESG | IESG state | Expired | |
| Telechat date | (None) | ||
| Responsible AD | (None) | ||
| Send notices to | (None) |
This Internet-Draft is no longer active. A copy of the expired Internet-Draft is available in these formats:
Abstract
This document defines a compression method for Segment Identifiers (SIDs) in Segment Routing over IPv6 (SRv6) specifically designed for satellite networks. By leveraging the topological location information of satellite nodes, a 128-bit SID is compressed into a 32-bit Compressed SID (C-SID). The method introduces a "SID Container" structure to support the co-existence of 128-bit SIDs and 32-bit C-SIDs within a single Segment List without modifying the SRv6 control plane or the fixed SRH header format defined in RFC 8754.
Authors
陈宏彦
Jun Liu
Wenfeng Li
Kanglian Zhao
(Note: The e-mail addresses provided for the authors of this Internet-Draft may no longer be valid.)