Skip to main content

Preferred Path Routing (PPR) in IS-IS
draft-chunduri-lsr-isis-preferred-path-routing-06

The information below is for an old version of the document.
Document Type Expired Internet-Draft (individual)
Authors Uma Chunduri , Richard Li , Russ White , Jeff Tantsura , Luis M. Contreras , Yingzhen Qu
Last updated 2021-04-01 (Latest revision 2020-09-28)
Stream (None)
Formats
Expired & archived
plain text htmlized pdfized bibtex
Stream Stream state (No stream defined)
Consensus boilerplate Unknown
RFC Editor Note (None)
IESG IESG state Expired
Telechat date (None)
Responsible AD (None)
Send notices to (None)
This Internet-Draft is no longer active. A copy of the expired Internet-Draft can be found at:
https://www.ietf.org/archive/id/draft-chunduri-lsr-isis-preferred-path-routing-06.txt

Abstract

This document specifies Preferred Path Routing (PPR), an extensible method of providing path based dynamic routing for a number of packet types including IPv4, IPv6 and MPLS. PPR uses a simple encapsulation to add the path identity to the packet. PPR can also be used to mitigate the MTU and data plane processing issues that may result from Segment Routing (SR) packet overhead; and also supports further extensions along the paths.

Authors

Uma Chunduri
Richard Li
Russ White
Jeff Tantsura
Luis M. Contreras
Yingzhen Qu

(Note: The e-mail addresses provided for the authors of this Internet-Draft may no longer be valid.)