Handling IPv6 Sources and Destinations in the MPLS and GMPLS TE MIB Modules
draft-davey-ccamp-gmpls-te-mib-ipv6-addr-00
| Document | Type |
Expired Internet-Draft
(individual)
Expired & archived
|
|
|---|---|---|---|
| Author | Alan Davey | ||
| Last updated | 2005-03-25 | ||
| RFC stream | (None) | ||
| Intended RFC status | (None) | ||
| Formats | |||
| Stream | Stream state | (No stream defined) | |
| Consensus boilerplate | Unknown | ||
| RFC Editor Note | (None) | ||
| IESG | IESG state | Expired | |
| Telechat date | (None) | ||
| Responsible AD | (None) | ||
| Send notices to | (None) |
This Internet-Draft is no longer active. A copy of the expired Internet-Draft is available in these formats:
Abstract
This document describes how to configure or monitor a Multiprotocol Label Switching (MPLS) or Generalized MPLS (GMPLS) Traffic Engineered (TE) Label Switched Path (LSP) using the MPLS and GMPLS TE MIB module where the ingress and/or egress routers are identified using IPv6 addresses.
Authors
(Note: The e-mail addresses provided for the authors of this Internet-Draft may no longer be valid.)