Reverse CoA in RADIUS
draft-dekok-radext-reverse-coa-00
Document | Type |
This is an older version of an Internet-Draft whose latest revision state is "Replaced".
Expired & archived
|
|
---|---|---|---|
Authors | Alan DeKok , Vadim Cargatser | ||
Last updated | 2023-04-23 (Latest revision 2022-10-20) | ||
Replaced by | draft-ietf-radext-reverse-coa | ||
RFC stream | (None) | ||
Formats | |||
Stream | Stream state | (No stream defined) | |
Consensus boilerplate | Unknown | ||
RFC Editor Note | (None) | ||
IESG | IESG state | Expired | |
Telechat date | (None) | ||
Responsible AD | (None) | ||
Send notices to | (None) |
This Internet-Draft is no longer active. A copy of the expired Internet-Draft is available in these formats:
Abstract
This document defines a "reverse change of authorization (CoA)" path for RADIUS packets. This specification allows a home server to send CoA packets in "reverse" down a RADIUS/TLS connection. Without this capability, it is impossible for a home server to send CoA packets to a NAS which is behind a firewall or NAT gateway. The reverse CoA functionality extends the available transport methods for CoA packets, but it does not change anything else about how CoA packets are handled.
Authors
(Note: The e-mail addresses provided for the authors of this Internet-Draft may no longer be valid.)