Skip to main content

A YANG model to manage the optical interface parameters for an external transponder in a WDM network
draft-dharini-dwdm-if-yang-00

Document Type Replaced Internet-Draft (individual)
Expired & archived
Authors Gabriele Galimberti , Ruediger Kunze , Hing-Kam Lam , Dharini Hiremagalur , Gert Grammel , Luyuan Fang , Gary Ratterree
Last updated 2016-03-17
Replaces draft-dharini-netmod-dwdm-if-yang
Replaced by draft-dharini-ccamp-dwdm-if-yang
RFC stream (None)
Intended RFC status (None)
Formats
Yang Validation 0 errors, 0 warnings
Stream Stream state (No stream defined)
Consensus boilerplate Unknown
RFC Editor Note (None)
IESG IESG state Replaced by draft-dharini-ccamp-dwdm-if-yang
Telechat date (None)
Responsible AD (None)
Send notices to (None)

This Internet-Draft is no longer active. A copy of the expired Internet-Draft is available in these formats:

Abstract

This memo defines a Yang model that translates the SNMP mib module defined in draft-galikunze-ccamp-dwdm-if-snmp-mib for managing single channel optical interface parameters of DWDM applications. This model is to support the optical parameters specified in ITU-T G.698.2 [ITU.G698.2] and application identifiers specified in ITU-T G.874.1 [ITU.G874.1] . Note that G.874.1 encompasses vendor-specific codes, which if used would make the interface a single vendor IaDI and could still be managed. The Yang model defined in this memo can be used for Optical Parameters monitoring and/or configuration of the endpoints of the multi-vendor IaDI optical link.

Authors

Gabriele Galimberti
Ruediger Kunze
Hing-Kam Lam
Dharini Hiremagalur
Gert Grammel
Luyuan Fang
Gary Ratterree

(Note: The e-mail addresses provided for the authors of this Internet-Draft may no longer be valid.)