A YANG model to manage the optical interface parameters of "G.698.2 single channel" in DWDM applications

Document Type Replaced Internet-Draft (individual)
Authors Gabriele Galimberti  , Ruediger Kunze  , Hing-Kam Lam  , Dharini Hiremagalur  , Gert Grammel  , Luyuan Fang  , Gary Ratterree 
Last updated 2016-01-07 (latest revision 2015-07-06)
Replaced by draft-dharini-netmod-dwdm-if-yang
Stream (None)
Intended RFC status (None)
Expired & archived
pdf htmlized (tools) htmlized bibtex
Stream Stream state (No stream defined)
Consensus Boilerplate Unknown
RFC Editor Note (None)
IESG IESG state Replaced by draft-dharini-netmod-dwdm-if-yang
Telechat date
Responsible AD (None)
Send notices to (None)

This Internet-Draft is no longer active. A copy of the expired Internet-Draft can be found at


This memo defines a Yang model that translates the SNMP mib module defined in draft-galikunze-ccamp-g-698-2-snmp-mib for managing single channel optical interface parameters of DWDM applications, using the approach specified in G.698.2. This model is to support the optical parameters specified in ITU-T G.698.2 [ITU.G698.2] and application identifiers specified in ITU-T G.874.1 [ITU.G874.1] . Note that G.874.1 encompasses vendor-specific codes, which if used would make the interface a single vendor IaDI and could still be managed. The Yang model defined in this memo can be used for Optical Parameters monitoring and/or configuration of the endpoints of the multi-vendor IaDI based on the Black Link approach.


Gabriele Galimberti (ggalimbe@cisco.com)
Ruediger Kunze (RKunze@telekom.de)
Hing-Kam Lam (Kam.Lam@alcatel-lucent.com)
Dharini Hiremagalur (dharinih@juniper.net)
Gert Grammel (ggrammel@juniper.net)
Luyuan Fang (lufang@microsoft.com)
Gary Ratterree (gratt@microsoft.com)

(Note: The e-mail addresses provided for the authors of this Internet-Draft may no longer be valid.)