Pseudowire Redundancy on S-PE
draft-dong-pwe3-redundancy-spe-04
| Document | Type |
Replaced Internet-Draft
(individual)
Expired & archived
|
|
|---|---|---|---|
| Authors | Jie Dong , Haibo Wang | ||
| Last updated | 2013-02-19 (Latest revision 2012-11-21) | ||
| Replaced by | draft-ietf-pwe3-redundancy-spe | ||
| RFC stream | (None) | ||
| Intended RFC status | (None) | ||
| Formats | |||
| Stream | Stream state | (No stream defined) | |
| Consensus boilerplate | Unknown | ||
| RFC Editor Note | (None) | ||
| IESG | IESG state | Replaced by draft-ietf-pwe3-redundancy-spe | |
| Telechat date | (None) | ||
| Responsible AD | (None) | ||
| Send notices to | (None) |
This Internet-Draft is no longer active. A copy of the expired Internet-Draft is available in these formats:
Abstract
This document describes Multi-Segment Pseudowire (MS-PW) protection scenarios in which the pseudowire redundancy is provided on the Switching-PE (S-PE). Operations of the S-PEs which provide PW redundancy are specified. Signaling of the preferential forwarding status as defined in [I-D.ietf-pwe3-redundancy-bit] is reused. This document does not require any change to the T-PEs of MS-PW.
Authors
(Note: The e-mail addresses provided for the authors of this Internet-Draft may no longer be valid.)