Customer Edge Router Identification Option
draft-donley-dhc-cer-id-option-01
The information below is for an old version of the document.
Document | Type |
This is an older version of an Internet-Draft whose latest revision state is "Expired".
Expired & archived
|
|
---|---|---|---|
Authors | Chris Donley , Chris Grundemann | ||
Last updated | 2013-03-11 (Latest revision 2012-09-06) | ||
RFC stream | (None) | ||
Formats | |||
Stream | Stream state | (No stream defined) | |
Consensus boilerplate | Unknown | ||
RFC Editor Note | (None) | ||
IESG | IESG state | Expired | |
Telechat date | (None) | ||
Responsible AD | (None) | ||
Send notices to | (None) |
This Internet-Draft is no longer active. A copy of the expired Internet-Draft is available in these formats:
Abstract
Several addressing mechanisms supporting DHCPv6 Prefix Delegation in home networks require identification of the customer edge router (CER) as the demarcation between the customer network and the service provider network. This document reserves a DHCPv6 option to identify the CER.
Authors
(Note: The e-mail addresses provided for the authors of this Internet-Draft may no longer be valid.)