Customer Edge Router Identification Option
draft-donley-dhc-cer-id-option-04

The information below is for an old version of the document
Document Type Expired Internet-Draft (individual)
Authors Chris Donley  , Michael Kloberdans  , John Brzozowski  , Chris Grundemann 
Last updated 2015-02-13 (latest revision 2014-08-12)
Stream (None)
Formats
Expired & archived
pdf htmlized (tools) htmlized bibtex
Stream Stream state (No stream defined)
Consensus Boilerplate Unknown
RFC Editor Note (None)
IESG IESG state Expired
Telechat date
Responsible AD (None)
Send notices to (None)

This Internet-Draft is no longer active. A copy of the expired Internet-Draft can be found at
https://www.ietf.org/archive/id/draft-donley-dhc-cer-id-option-04.txt

Abstract

Addressing mechanisms supporting DHCPv6 Prefix Delegation in home networks such as those described in CableLabs' eRouter specification and the HIPnet Internet-Draft require identification of the customer edge router (CER) as the demarcation between the customer network and the service provider network. This document reserves a DHCPv6 option to identify the CER.

Authors

Chris Donley (c.donley@cablelabs.com)
Michael Kloberdans (m.kloberdans@cablelabs.com)
John Brzozowski (john_brzozowski@cable.comcast.com)
Chris Grundemann (cgrundemann@gmail.com)

(Note: The e-mail addresses provided for the authors of this Internet-Draft may no longer be valid.)