TRILL Use of IS-IS
draft-eastlake-isis-trill-01
| Document | Type |
Replaced Internet-Draft
(individual)
Expired & archived
|
|
|---|---|---|---|
| Authors | Ayan Banerjee , Donald E. Eastlake 3rd , Dinesh G. Dutt, Radia Perlman , Anoop Ghanwani | ||
| Last updated | 2010-08-05 (Latest revision 2010-06-28) | ||
| Replaces | draft-eastlake-trill-rbridge-isis | ||
| Replaced by | RFC 6326 | ||
| RFC stream | (None) | ||
| Intended RFC status | (None) | ||
| Formats | |||
| Stream | Stream state | (No stream defined) | |
| Consensus boilerplate | Unknown | ||
| RFC Editor Note | (None) | ||
| IESG | IESG state | Replaced by draft-ietf-isis-trill | |
| Telechat date | (None) | ||
| Responsible AD | (None) | ||
| Send notices to | (None) |
This Internet-Draft is no longer active. A copy of the expired Internet-Draft is available in these formats:
Abstract
The IETF has standardized the TRILL protocol, which provides transparent Layer 2 forwarding using encapsulation with a hop count and IS-IS link state routing. This document specifies the data formats and code points for the IS-IS extensions to support TRILL.
Authors
Ayan Banerjee
Donald E. Eastlake 3rd
Dinesh G. Dutt
Radia Perlman
Anoop Ghanwani
(Note: The e-mail addresses provided for the authors of this Internet-Draft may no longer be valid.)