TRILL: Adjacency
draft-eastlake-trill-rfc6327bis-00
| Document | Type | Replaced Internet-Draft (trill WG) | |
|---|---|---|---|
| Authors | Donald E. Eastlake 3rd , Radia Perlman , Anoop Ghanwani , Vishwas Manral | ||
| Last updated | 2013-06-27 (Latest revision 2013-04-28) | ||
| Replaced by | RFC 7177 | ||
| Stream | Internet Engineering Task Force (IETF) | ||
| Intended RFC status | (None) | ||
| Formats |
Expired & archived
plain text
htmlized
pdfized
bibtex
|
||
| Stream | WG state | Adopted by a WG | |
| Document shepherd | (None) | ||
| IESG | IESG state | Replaced by draft-ietf-trill-rfc6327bis | |
| Consensus boilerplate | Unknown | ||
| Telechat date | (None) | ||
| Responsible AD | (None) | ||
| Send notices to | (None) |
https://www.ietf.org/archive/id/draft-eastlake-trill-rfc6327bis-00.txt
Abstract
The IETF TRILL (TRansparent Interconnection of Lots of Links) protocol supports arbitrary link technologies between TRILL switches including point-to-point links and multi-access LAN (Local Area Network) links that can have multiple TRILL switches and end stations attached. TRILL uses IS-IS (Intermediate System to Intermediate System) routing. This document specifies the establishment, reporting, and termination of IS-IS adjacency between TRILL switches, also known as RBridges. It also concerns four other link-local aspects of TRILL: Designated RBridge (DRB) selection, MTU (Maximum Transmission Unit) testing, pseudonode creation, and BFD (Bi- Directional Forwarding Detection) session bootstrapping in connection with adjacency. State diagrams are included where appropriate. This document obsoletes RFC 6327 and updates RFC 6325.
Authors
Donald E. Eastlake 3rd
Radia Perlman
Anoop Ghanwani
Vishwas Manral
(Note: The e-mail addresses provided for the authors of this Internet-Draft may no longer be valid.)