%% You should probably cite draft-ietf-ipsecme-ikev2-ipv6-config instead of this I-D.
@techreport{eronen-ipsec-ikev2-ipv6-config-05,
    number =    {draft-eronen-ipsec-ikev2-ipv6-config-05},
    type =      {Internet-Draft},
    institution =   {Internet Engineering Task Force},
    publisher = {Internet Engineering Task Force},
    note =      {Work in Progress},
    url =       {https://datatracker.ietf.org/doc/draft-eronen-ipsec-ikev2-ipv6-config/05/},
    author =    {Pasi Eronen and Julien Laganier and Cheryl R. Madson},
    title =     {{IPv6 Configuration in IKEv2}},
    pagetotal = 36,
    year =      2008,
    month =     oct,
    day =       28,
    abstract =  {When IKEv2 is used for remote VPN access (client to VPN gateway), the gateway assigns the client an IP address from the internal network using IKEv2 configuration payloads. The configuration payloads specified in RFC 4306 work well for IPv4, but make it difficult to use certain features of IPv6. This document describes the limitations of current IKEv2 configuration payloads for IPv6, and explores possible solutions that would allow IKEv2 to set up full- featured virtual IPv6 interfaces.},
}