GMPLS control of Ethernet PBB-TE
draft-fedyk-gmpls-ethernet-pbb-te-02
| Document | Type |
Expired Internet-Draft
(individual)
Expired & archived
|
|
|---|---|---|---|
| Author | Don Fedyk | ||
| Last updated | 2007-11-20 | ||
| RFC stream | (None) | ||
| Intended RFC status | (None) | ||
| Formats | |||
| Stream | Stream state | (No stream defined) | |
| Consensus boilerplate | Unknown | ||
| RFC Editor Note | (None) | ||
| IESG | IESG state | Expired | |
| Telechat date | (None) | ||
| Responsible AD | (None) | ||
| Send notices to | (None) |
This Internet-Draft is no longer active. A copy of the expired Internet-Draft is available in these formats:
Abstract
This memo is complementary to [ARCH] and describes how a GMPLS control plane may be applied to the Provider Backbone Bridges Traffic Engineering (PBB-TE) [IEEE 802.1Qay] amendment to 802.1Q and how GMPLS can be used to configure VLAN-aware Ethernet switches in order to establish Ethernet point to point (P2P) and P2MP MAC switched paths and P2P/P2MP VID based trees. This document supports, but does not modify, the standard IEEE data.
Authors
(Note: The e-mail addresses provided for the authors of this Internet-Draft may no longer be valid.)