Skip to main content

Enhancing Security and Privacy with In-Network Computing
draft-fink-coin-sec-priv-01

The information below is for an old version of the document.
Document Type
This is an older version of an Internet-Draft whose latest revision state is "Expired".
Authors Ina Berenice Fink , Klaus Wehrle
Last updated 2020-09-08
RFC stream (None)
Formats
Stream Stream state (No stream defined)
Consensus boilerplate Unknown
RFC Editor Note (None)
IESG IESG state I-D Exists
Telechat date (None)
Responsible AD (None)
Send notices to (None)
draft-fink-coin-sec-priv-01
COINRG                                                           I. Fink
Internet-Draft                                                 K. Wehrle
Intended status: Informational                    RWTH Aachen University
Expires: March 12, 2021                                September 8, 2020

        Enhancing Security and Privacy with In-Network Computing
                      draft-fink-coin-sec-priv-01

Abstract

   With the growing interconnection of devices, cyber-security and data
   protection are of increasing importance.  This is especially the case
   regarding cyber-physical systems due to their close entanglement with
   the physical world.  Misbehavior and information leakage can lead to
   financial and physical damage and endanger human lives and well-
   being.  Thus, hard security and privacy requirements are necessary to
   be met.  Furthermore, a thorough investigation of incidents is
   essential for ultimate protection.  In-network computing allows the
   processing of traffic and data directly in the network and at line-
   rate.  Thus, the in-network computing paradigm presents a promising
   solution for efficiently providing security and privacy mechanisms as
   well as event analysis.  This document discusses select mechanisms to
   demonstrate how in-network computing concepts can be applied to
   counter existing shortcomings of cyber-security and data privacy.

Status of This Memo

   This Internet-Draft is submitted in full conformance with the
   provisions of BCP 78 and BCP 79.

   Internet-Drafts are working documents of the Internet Engineering
   Task Force (IETF).  Note that other groups may also distribute
   working documents as Internet-Drafts.  The list of current Internet-
   Drafts is at https://datatracker.ietf.org/drafts/current/.

   Internet-Drafts are draft documents valid for a maximum of six months
   and may be updated, replaced, or obsoleted by other documents at any
   time.  It is inappropriate to use Internet-Drafts as reference
   material or to cite them other than as "work in progress."

   This Internet-Draft will expire on March 12, 2021.

Copyright Notice

   Copyright (c) 2020 IETF Trust and the persons identified as the
   document authors.  All rights reserved.

Fink & Wehrle            Expires March 12, 2021                 [Page 1]
Internet-Draft       Enhancing Security and Privacy       September 2020

   This document is subject to BCP 78 and the IETF Trust's Legal
   Provisions Relating to IETF Documents
   (https://trustee.ietf.org/license-info) in effect on the date of
   publication of this document.  Please review these documents
   carefully, as they describe your rights and restrictions with respect
   to this document.  Code Components extracted from this document must
   include Simplified BSD License text as described in Section 4.e of
   the Trust Legal Provisions and are provided without warranty as
   described in the Simplified BSD License.

Table of Contents

   1.  Introduction  . . . . . . . . . . . . . . . . . . . . . . . .   2
   2.  Protection Mechanisms . . . . . . . . . . . . . . . . . . . .   4
     2.1.  Encryption and Integrity Checks . . . . . . . . . . . . .   4
     2.2.  Authorization and Authentication  . . . . . . . . . . . .   5
     2.3.  Behavioral and Enterprise Policies  . . . . . . . . . . .   5
     2.4.  In-Network Vulnerability Patches  . . . . . . . . . . . .   6
     2.5.  Anonymization . . . . . . . . . . . . . . . . . . . . . .   7
   3.  Intrusion and Anomaly Detection . . . . . . . . . . . . . . .   7
     3.1.  Intrusion Detection . . . . . . . . . . . . . . . . . . .   8
     3.2.  Dead Man's Switch . . . . . . . . . . . . . . . . . . . .   8
   4.  Incident Investigation  . . . . . . . . . . . . . . . . . . .   8
   5.  Security Considerations . . . . . . . . . . . . . . . . . . .   9
   6.  IANA Considerations . . . . . . . . . . . . . . . . . . . . .   9
   7.  Conclusion  . . . . . . . . . . . . . . . . . . . . . . . . .   9
   8.  Informative References  . . . . . . . . . . . . . . . . . . .   9
   Authors' Addresses  . . . . . . . . . . . . . . . . . . . . . . .  10

1.  Introduction

   Several deficiencies emerge from cyber-physical systems (CPS) such as
   the (Industrial) Internet of Things (IoT).  Everyday things are
   equipped with sensors and CPUs to allow for automatization and make
   life more comfortable.  The deployment of additional sensors supports
   the processing efficiency in Industrial Control Systems (ICS).  The
   entanglement of the sensors with the physical world leads to high
   sensitivity of the transmitted and collected data.  At the same time,
   devices are increasingly connected to the Internet to enable, e.g.,
   processing of data on cloud servers or exchange with other systems.

   Devices in CPS are often resource-constrained and do not offer the
   possibility to implement elaborate security mechanisms.  Furthermore,
   legacy devices and communication protocols are often still used in
   industrial networks but were not designed to face the security and
   privacy challenges the new interconnection brings.  Thus,
   communication and access are often unprotected, providing new attack
   surfaces with severe consequences: leakage of private data endangers

Fink & Wehrle            Expires March 12, 2021                 [Page 2]
Internet-Draft       Enhancing Security and Privacy       September 2020

   the users' privacy.  The leakage of business secrets bears the risk
   of severe financial damage.  Manipulation of ICSs can lead to
   downtimes in the best case or, financially worse, faulty production
   results.  Last, the failure of CPS can lead to personal injury or
   even death.  As a consequence of the described risks, we need
   security and privacy measures tailored to the new situation.
   Upgrading legacy devices with protection mechanisms is an effortful
   and expensive procedure.  A promising approach for retrofitting
   security nevertheless is the deployment of suitable mechanisms within
   the network.  To date, this is mainly realized using middle-boxes,
   leading to overhead and need for additional hardware.

   While proper prevention and detection of attacks in the (Industrial)
   IoT is an unresolved issue, the after-treatment of incidents in
   networks offers room for general improvement.  We can use network
   forensics to retrace and comprehend the origin and course of
   malicious events.  However, the underlying monitoring of network
   traffic requires special hardware leading to high costs in
   traditional networks.

   The common problem of all shortcomings is that traditional networking
   devices only allow for fixed-function deployment.  Software-defined
   networking (SDN) enables more flexible traffic handling in the
   network by separating control and data plane.  However, the use of
   fixed-function switches still restricts primary approaches like
   OpenFlow.  Those switches match traffic against a fixed set of
   protocol headers to decide if and where it should be forwarded.
   Furthermore, consultation of the remote control plane leads to
   communication overhead and delays, which is especially unfavorable in
   the context of time-sensitive applications, e.g., in industry.

   INC, in contrast, covers the shortfalls of traditional networks and
   SDN by allowing actual programming of the switches.  This
   programmability leads to dynamic and custom processing of network
   packets at line-rate.  Thus, security-related functions and packet
   inspection can be implemented and applied right at the switch.

   This draft explores the opportunities of INC for improving security
   and privacy as follows: we first describe feasible mechanisms for
   preventing attacks and intrusion in the first place.  Then, we
   present which mechanisms we can implement with INC for detecting
   intrusion and undesired behavior when it has already taken place.
   Last, we explore how INC can improve network forensics for analyzing
   and following up incidents, preventing future attacks.

Fink & Wehrle            Expires March 12, 2021                 [Page 3]
Internet-Draft       Enhancing Security and Privacy       September 2020

2.  Protection Mechanisms

   The common ground for providing security and data privacy is to
   protect against unauthorized access.  That protection is primarily
   provided by deploying the basic security mechanisms encryption,
   integrity checking, authentication, and authorization.  Those are
   especially often missing in resource-constrained environments.
   [RFC7744] thoroughly discusses the need for authentication and
   authorization in resource-restrained environments.  [RFC8576]
   presents security and privacy risks and challenges specific to the
   IoT.  In the following, we describe how INC can help to retrofit
   suitable mechanisms.

2.1.  Encryption and Integrity Checks

   Encryption is critical to preserve confidentiality when transmitting
   data.  Integrity checks prevent undetected manipulation, which can
   remain unnoticed even despite encryption, e.g., in case of flipped
   bits.  Due to resource-constraints, many devices in CPS do not
   provide encryption or calculation of check-sums.

   Complex cryptography is not supported by current programmable
   switches either.  However, this might change in the future, which
   would allow retrofitting encryption and integrity checks at
   networking devices.  Concretely, using INC with suitable hardware,
   data could be encrypted and supplemented with a check-sum directly at
   the first networking device passed by the respective data packet.
   The packet is then forwarded through the network or Internet to its
   designated destination.  Decryption and integrity checks can be
   executed at the last networking device before the destination.
   Alternatively, this can be implemented at the destination if
   supported by the respective device.  This approach does not require
   deployment or forwarding to additional middle-boxes.  Thus, no
   additional attack surface or processing overhead is introduced, which
   is essential for time-sensitive processes as often at hand in the
   industry.

   Overall, INC has the potential to help maintain confidentiality and
   integrity efficiently, and thus the availability of resource-
   constrained or legacy devices.  Questions to clarify are if and at
   which costs hardware for enabling cryptographic calculations could
   and should be embedded in future generations of programmable
   networking devices.

Fink & Wehrle            Expires March 12, 2021                 [Page 4]
Internet-Draft       Enhancing Security and Privacy       September 2020

2.2.  Authorization and Authentication

   Authorization and authentication mechanisms are needed to avoid
   unauthorized access to devices and their manipulation in the first
   place.  With INC, networking devices can flexibly decide whether to
   forward packets, thus enforce authorization and authentication
   checks.

   One possibility for authorization is to conduct a handshake between
   the sender and networking device before starting the communication
   with the industrial device.  If not feasible in switch hardware, the
   respective calculations can be conducted in the control plane.  In
   the case of success, the sender is added to a list of authorized
   communication partners.  The decision is then enforced by the switch.
   Since authorization is only needed when starting or refreshing a
   connection, the necessity and overhead for consulting the control
   plane are limited.

   The sender can append a secret token for authentication to packets
   directed to an industrial device.  Then, the last networking device
   can authenticate the sender and forward the actual data only in case
   of success and drop it otherwise.  One possibility to avoid
   eavesdropping of the token is the use of hash chains.  Secure
   reinitialization can again be done using the control plane, which
   usually has the resources for conducting encrypted communication.

   In the case of unsuccessful authorization or authentication,
   networking devices can inform the network administrator about
   possible intrusion of the system.

   Undesired traffic can emerge even from authorized and authenticated
   devices.  A solution is to add policy-based access control, on which
   we elaborate in the next subsection.

2.3.  Behavioral and Enterprise Policies

   Control processes can include communication between various parties.
   Even despite authorization and authentication mechanisms, undesired
   behavior can occur.  For instance, malicious third-party software
   might be installed at the approved device.  Regarding communication
   between two legacy devices, authentication might not be possible at
   all.  An effective way to exclude malicious behavior nevertheless is
   policy-based access control.

   [RFC8520] proposes the Manufacturer Usage Description (MUD), a
   standard for defining the communication behavior of IoT devices,
   which use specific communication patterns.  The definition is
   primarily based on domain names, ports, and protocols (e.g., TCP and

Fink & Wehrle            Expires March 12, 2021                 [Page 5]
Internet-Draft       Enhancing Security and Privacy       September 2020

   UDP).  Further characteristics as the TLS usage
   [I-D.draft-reddy-opsawg-mud-tls-03] or the required bandwidth of a
   device [I-D.draft-lear-opsawg-mud-bw-profile-01] can help to define
   connections more narrowly.

   By defining the typical behavior, we can exclude deviating
   communication, including undesired behavior.  Likewise to IoT
   devices, industrial devices usually serve a specific purpose.  Thus,
   the application of MUD or similar policies is possible in industrial
   scenarios as well.

   The problem that remains to date is the efficient enforcement of such
   policies through fine-granular and flexible traffic filtering.  While
   middle-boxes increase costs and processing overhead, primary SDN
   approaches as OpenFlow allow only filtering based on match-action
   rules regarding fixed protocol header fields.  Evaluation of traffic
   statistics for, e.g., limiting the bandwidth, requires consultation
   of the remote controller.  This leads to latency overheads, which are
   not acceptable in time-sensitive scenarios.

   In contrast, the INC paradigm allows flexible filtering even
   concerning the content of packets and connection metadata.
   Furthermore, traffic filtering can be executed at line-rate in the
   switch.

   Going one step further, not only network communication behavior of
   devices can be defined in policies.  As [KANG] shows, INC can be used
   to consider additional (contextual) parameters, e.g., the time of day
   or activity of other devices in the network.  Furthermore, companies
   can define advanced policies to, e.g., authorize specific users or
   subnets.

   While the presented policies aim to restrict communication to its
   designated purpose, we can use access control to explicitly address
   individual devices' security vulnerabilities as described next.

2.4.  In-Network Vulnerability Patches

   Resource-constrained devices are typically hard to update.  Thus,
   device vulnerabilities often cannot be fixed after deployment.  As a
   remedy and special case of policies, rules can be defined to describe
   known attacks' signatures.  By enforcing these rules at programmable
   networking devices, e.g., by dropping matching traffic, INC offers an
   efficient way to avoid exploitation of device vulnerabilities.
   Further advantages are the potentially easy and extensive roll-out of
   such "in-network patches" in the form of (automatic) software updates
   of the network device.

Fink & Wehrle            Expires March 12, 2021                 [Page 6]
Internet-Draft       Enhancing Security and Privacy       September 2020

   Future research is needed to evaluate the potential and benefits of
   in-network patches compared to traditional security measures, e.g.,
   firewalls, and provide proof of concepts using existing devices and
   vulnerabilities.

   Besides presented security mechanisms, data protection mechanisms are
   required to preserve business secrets and the privacy of individuals.
   We show in the following subsection how INC can contribute to data
   anonymization.

2.5.  Anonymization

   Due to its interconnection with the physical world, the generation of
   sensitive data is inherent to CPS.  Smart infrastructure leads to the
   collection of sensitive user data.  In industrial networks,
   information about confidential processes is gathered.  Such data is
   increasingly shared with other entities to increase production
   efficiency or enable automatic processing.

   Despite the benefits of data exchange, manufacturers and individuals,
   might not want to share sensitive information.  Again, deployment of
   privacy mechanisms is usually not possible at resource-constrained or
   legacy devices.  INC has the potential to flexibly apply privacy
   mechanisms at line-rate.

   Data can be pseudonymized at networking devices by, e.g., extracting
   and replacing specific values.  Furthermore, elaborate anonymization
   techniques can be implemented in the network by sensibly decreasing
   the data accuracy.  For example, concepts like k-Anonymity can be
   applied by aggregating the values of multiple packets before
   forwarding the result.  Noise addition can be implemented by adding a
   random number to values.  Similarly, the state-of-the-art technique
   differential privacy can be implemented by adding noise to responses
   to statistical requests.

   Even though the INC paradigm shows the potential to deploy described
   privacy mechanisms within the network, research is needed to clarify
   the proposed concepts' feasibility.

3.  Intrusion and Anomaly Detection

   Ideally, attacks are prevented from the outset.  However, in the case
   of incidents, fast detection is critical for limiting damage.
   Deployment of sensors, e.g., in industrial control systems, can help
   to monitor the system state and detect anomalies.  This can be used
   in combination with INC to detect intrusion and to provide advanced
   safety measures, as described in the following.

Fink & Wehrle            Expires March 12, 2021                 [Page 7]
Internet-Draft       Enhancing Security and Privacy       September 2020

3.1.  Intrusion Detection

   Data of sensors or communication behavior can be compared against
   expected patterns to detect intrusion.  Even if intrusion prevention
   is deployed and connections are allowed when taken individually,
   subtle attacks might still be possible.  For example, a series of
   values might be out of line if put into context even though the
   individual values are unobtrusive.  Anomaly detection can be used to
   detect such abnormalities and notify the network administrator for
   further assessment.

   While anomaly detection is usually outsourced to middle-boxes or
   external servers, INC provides the possibility to detect anomalies
   at-line rate, e.g., by maintaining statistics about traffic flows.
   This decreases costs and latency, which is valuable for a prompt
   reaction.

   Besides intrusion, anomalies can also imply safety risks.  In the
   following, we pick up the potential of INC to support safety.

3.2.  Dead Man's Switch

   [I-D.draft-kunze-coin-industrial-use-cases-03] addresses the
   potential of INC for improving industrial safety.  Detection of an
   anomaly in the sensor data or operational flow can be used to
   automatically trigger an emergency shutdown of a system or single
   system components if the data indicates an actual hazard.  Apart from
   that, other safety measures like warning systems or isolation of
   areas can be implemented.  While we do not aim at replacing
   traditional dead man's switches, we see the potential of INC to
   accelerate the detection of failures.  Thus, INC can valuably
   complement existing safety measures.

4.  Incident Investigation

   After detecting an incident, it is essential to conduct Network
   Forensics to investigate the origin and spreading of the related
   activity.  The results of this analysis can be used to allow for
   consistent recovery, to adapt protection mechanisms, and prevent
   similar events in the future.  For enabling potential investigation,
   traffic records are constantly collected for each flow in a network.
   This requires additional hardware in large networks.  Furthermore, it
   might be preferable to exclude, e.g., specific subnets from the
   analysis.  This is not easily possible with traditional networking
   devices, leading to storage and processing overhead.

   With INC, flow records can be created directly at the switch when
   forwarding a packet.  Furthermore, record generation can be done more

Fink & Wehrle            Expires March 12, 2021                 [Page 8]
Internet-Draft       Enhancing Security and Privacy       September 2020

   flexibly, e.g., by applying fine-granular traffic filtering.  Also,
   header fields of particular interest can be efficiently extracted.
   Therefore, INC can considerably decrease the load and increase the
   efficiency of network forensics.  This leads, in turn, to a better
   understanding of attacks and security.

5.  Security Considerations

   When implementing security and privacy measures in networking
   devices, the networking devices' security and failure resistance is
   critical.  Related research questions to clarify in the future are
   stated in [I-D.draft-kutscher-coinrg-dir-01].

6.  IANA Considerations

   N/A

7.  Conclusion

   INC has the potential to improve and retrofit security and privacy,
   especially in concern of resource-restrained and legacy devices.

   First, INC can provide intrusion prevention mechanisms like
   authentication and efficient enforcement of (context-based) policies.
   Easily deployable in-network patches of device vulnerabilities could
   further improve security.  Encryption and integrity checks are
   limited by the current hardware but might be realizable in the
   future.

   Second, INC allows examining packet contents at networking devices,
   which can be used to implement fast anomaly and intrusion detection
   in the network.

   Last, INC can contribute to an efficient and targeted incident
   analysis.

   Investigation of the feasibility of the presented mechanisms is
   subject to future research.

8.  Informative References

   [I-D.draft-kunze-coin-industrial-use-cases-03]
              Kunze, I. and K. Wehrle, "Industrial Use Cases for In-
              Network Computing", draft-kunze-coin-industrial-use-
              cases-03 (work in progress), September 2020.

Fink & Wehrle            Expires March 12, 2021                 [Page 9]
Internet-Draft       Enhancing Security and Privacy       September 2020

   [I-D.draft-kutscher-coinrg-dir-01]
              Kutscher, D., Karkkainen, T., and J. Ott, "Directions for
              Computing in the Network", draft-kutscher-coinrg-dir-01
              (work in progress), November 2019.

   [I-D.draft-lear-opsawg-mud-bw-profile-01]
              Lear, E. and O. Friel, "Bandwidth Profiling Extensions for
              MUD", draft-lear-opsawg-mud-bw-profile-01 (work in
              progress), July 2019.

   [I-D.draft-reddy-opsawg-mud-tls-03]
              Reddy, T., Wing, D., and B. Anderson, "MUD (D)TLS profiles
              for IoT devices", draft-reddy-opsawg-mud-tls-03 (work in
              progress), January 2019.

   [KANG]     Kang, Q., Morrison, A., Tang, Y., Chen, A., and X. Luo,
              "Programmable In-Network Security for Context-aware BYOD
              Policies", In Proceedings of the 29th USENIX Security
              Symposium (USENIX Security 20), August 2020,
              <https://www.usenix.org/conference/usenixsecurity20/
              presentation/kang>.

   [RFC7744]  Seitz, L., Ed., Gerdes, S., Ed., Selander, G., Mani, M.,
              and S. Kumar, "Use Cases for Authentication and
              Authorization in Constrained Environments", RFC 7744,
              DOI 10.17487/RFC7744, January 2016,
              <https://www.rfc-editor.org/info/rfc7744>.

   [RFC8520]  Lear, E., Droms, R., and D. Romascanu, "Manufacturer Usage
              Description Specification", RFC 8520,
              DOI 10.17487/RFC8520, March 2019,
              <https://www.rfc-editor.org/info/rfc8520>.

   [RFC8576]  Garcia-Morchon, O., Kumar, S., and M. Sethi, "Internet of
              Things (IoT) Security: State of the Art and Challenges",
              RFC 8576, DOI 10.17487/RFC8576, April 2019,
              <https://www.rfc-editor.org/info/rfc8576>.

Authors' Addresses

   Ina Berenice Fink
   RWTH Aachen University
   Ahornstr. 55
   Aachen  D-52062
   Germany

   Phone: +49-241-80-21419
   Email: fink@comsys.rwth-aachen.de

Fink & Wehrle            Expires March 12, 2021                [Page 10]
Internet-Draft       Enhancing Security and Privacy       September 2020

   Klaus Wehrle
   RWTH Aachen University
   Ahornstr. 55
   Aachen  D-52062
   Germany

   Phone: +49-241-80-21401
   Email: wehrle@comsys.rwth-aachen.de

Fink & Wehrle            Expires March 12, 2021                [Page 11]