Alternate Marking Extension to Active Measurement Protocol
draft-fioccola-ippm-alt-mark-active-01
Document | Type |
Expired Internet-Draft
(individual)
Expired & archived
|
|
---|---|---|---|
Authors | Giuseppe Fioccola , Alexander Clemm , Stewart Bryant , Mauro Cociglio , Mouli Chandramouli , Alessandro Capello | ||
Last updated | 2017-09-14 (Latest revision 2017-03-13) | ||
RFC stream | (None) | ||
Intended RFC status | (None) | ||
Formats | |||
Stream | Stream state | (No stream defined) | |
Consensus boilerplate | Unknown | ||
RFC Editor Note | (None) | ||
IESG | IESG state | Expired | |
Telechat date | (None) | ||
Responsible AD | (None) | ||
Send notices to | (None) |
This Internet-Draft is no longer active. A copy of the expired Internet-Draft is available in these formats:
Abstract
This document describes how to extend the existing Active Measurement Protocol, in order to implement alternate marking methodology detailed in [I-D.ietf-ippm-alt-mark]. The extension for Two-Way Active Measurement Protocol (TWAMP) RFC 5357 [RFC5357] and One-way Active Measurement Protocol (OWAMP) RFC 4656 [RFC4656] will be considered. RFC6374 [RFC6374] Use Case is also reported. This proposal defines a simplified mechanism with benefits to the metric precision and computational load. Hybrid measurements are also enabled.
Authors
Giuseppe Fioccola
Alexander Clemm
Stewart Bryant
Mauro Cociglio
Mouli Chandramouli
Alessandro Capello
(Note: The e-mail addresses provided for the authors of this Internet-Draft may no longer be valid.)