Skip to main content

OSPF Version 2 as the Customer Edge/Customer Protocol for BGP/MPLS IP VPNs
draft-freedman-l3vpn-ospf2-4364-ce-01

Document Type Expired Internet-Draft (individual)
Expired & archived
Author David Freedman
Last updated 2013-01-16 (Latest revision 2012-07-15)
RFC stream (None)
Intended RFC status (None)
Formats
Stream Stream state (No stream defined)
Consensus boilerplate Unknown
RFC Editor Note (None)
IESG IESG state Expired
Telechat date (None)
Responsible AD (None)
Send notices to (None)

This Internet-Draft is no longer active. A copy of the expired Internet-Draft is available in these formats:

Abstract

RFC4577 (OSPF as the Provider/Customer Edge Protocol for BGP/MPLS IP VPNs) proposes a mechanism for the use of the Open Shortest Path First V2 ("OSPF", RFC2328) protocol between the Provider Edge ("PE") and Customer Edge ("CE") routers within a BGP/MPLS IP Virtual Private Network ("IPVPN", RFC4364). The standard provides for use of such a provider VPN to join discontiguous locations together, preserving the OSPF area and domain behaviour. This document describes a technique for utilising the same, IPVPN network infrastructure without the requirement to enable the OSPF protocol on the PE/CE interface and thus relieve the PE router of OSPF duties.

Authors

David Freedman

(Note: The e-mail addresses provided for the authors of this Internet-Draft may no longer be valid.)