Segment Routing Header encapsulation for Alternate Marking Method
draft-fz-spring-srv6-alt-mark-01
Document | Type |
This is an older version of an Internet-Draft whose latest revision state is "Active".
Expired & archived
|
|
---|---|---|---|
Authors | Giuseppe Fioccola , Tianran Zhou , Mauro Cociglio | ||
Last updated | 2022-01-10 (Latest revision 2021-07-09) | ||
RFC stream | (None) | ||
Formats | |||
Stream | Stream state | (No stream defined) | |
Consensus boilerplate | Unknown | ||
RFC Editor Note | (None) | ||
IESG | IESG state | Expired | |
Telechat date | (None) | ||
Responsible AD | (None) | ||
Send notices to | (None) |
This Internet-Draft is no longer active. A copy of the expired Internet-Draft is available in these formats:
Abstract
This document describes how the Alternate Marking Method can be used as the passive performance measurement tool in an SRv6 network. It defines how Alternate Marking data fields are transported as part of the Segment Routing with IPv6 data plane (SRv6) header.
Authors
Giuseppe Fioccola
Tianran Zhou
Mauro Cociglio
(Note: The e-mail addresses provided for the authors of this Internet-Draft may no longer be valid.)