An SNMP MIB extension to RFC3591 to manage optical interface parameters of "G.698.2 single channel" in DWDM applications
draft-galikunze-ccamp-dwdm-if-snmp-mib-01

Document Type Expired Internet-Draft (individual)
Last updated 2016-09-18 (latest revision 2016-03-17)
Stream (None)
Intended RFC status (None)
Formats
Expired & archived
pdf htmlized bibtex
Stream Stream state (No stream defined)
Consensus Boilerplate Unknown
RFC Editor Note (None)
IESG IESG state Expired
Telechat date
Responsible AD (None)
Send notices to (None)

This Internet-Draft is no longer active. A copy of the expired Internet-Draft can be found at
https://www.ietf.org/archive/id/draft-galikunze-ccamp-dwdm-if-snmp-mib-01.txt

Abstract

This memo defines a module of the Management Information Base (MIB) used by Simple Network Management Protocol (SNMP) in TCP/IP- based internet. In particular, it defines objects for managing single channel optical interface parameters of DWDM applications, using the approach specified in G.698.2 [ITU.G698.2] . This interface, described in ITU-T G.872, G.709 and G.798, is one type of OTN multi- vendor Intra-Domain Interface (IaDI). This RFC is an extension of RFC3591 to support the optical parameters specified in ITU-T G.698.2 and application identifiers specified in ITU-T G.874.1 [ITU.G874.1]. Note that G.874.1 encompasses vendor-specific codes, which if used would make the interface a single vendor IaDI and could still be managed. The MIB module defined in this memo can be used for Optical Parameters monitoring and/or configuration of the endpoints of the multi-vendor IaDI based on the Black Link approach.

Authors

Gabriele Galimberti (ggalimbe@cisco.com)
Ruediger Kunze (RKunze@telekom.de)
Dharini Hiremagalur (dharinih@juniper.net)
Luyuan Fang (lufang@microsoft.com)
Gary Ratterree (gratt@microsoft.com)

(Note: The e-mail addresses provided for the authors of this Internet-Draft may no longer be valid.)